Monday, July 30, 2012

Off the Record Messaging: A Tutorial

OK, a rather long post about effective digital communication. Hopefully an interesting read to folks who would like to add some code to protect communications but haven't gotten around to that TODO item just yet.

A commonly used method for sending messages to others when you need authentication and privacy is to use an OpenPGP tool such as GNU Privacy Guard (GnuPG). For real time communications such as instant messaging, IRC, and socket IO, using Off The Record (OTR) messaging provides Perfect Forward Secrecy and secure identification of the remote party without the need for a web of trust.

In order to operate without a web of trust, libotr implements the Socialist Millionaires' Protocol (SMP). The SMP allows two parties to verify that they both know the same secret. The secret might be a passphrase or answer to a private joke that two people will easily know. The SMP operates fine in the presence of eaves droppers (who don't get to learn the secret). Active communications tampering is not a problem, though of course it might cause the protocol not to complete successfully.

Because the SMP doesn't rely on the fingerprint of the user's private key for authentication, the private key becomes almost an implementation detail. Once generated, the user generally doesn't need to know about the key or it's fingerprint. The only time a user really cares to know is when a key is created because a bit of entropy has to go into that process. Of course, an application should avoid regenerating keys for no reason because each time the key is replaced the user has to use the SMP again to allow remote parties to authenticate them.

In this article I'll show you how to use the current release, libotr 3.2.0+, to provide OTR messaging. I'll present two examples which are both in C++ and use the boost library for socket IO. I have gone this was so we can focus on the OTR action and not the details of sockets.

The first example does not use the Socialist Millionaires' Protocol (SMP). So the new_fingerprint() callback is essential to establishing a secure session. When not using the SMP, authentication is performed by comparing the sent fingerprints of those you are wishing to communicate with against known good values. These known values must be sent beforehand through a secure secondary channel, such as a face to face meeting. Once fingerprints have been accepted, subsequent OTR communications with the same party can be performed without explicit fingerprint verification.

The second example makes things simpler for the user by using the SMP for authentication of the remote party. This way, the information exchanged beforehand becomes shared experiences you and the other party have had such that a question can be raised that only you and they can easily answer.
A central abstraction in using the libotr library is the struct s_OtrlMessageAppOps vtable. This is used by libotr to callback into your code when something happens such as a cryptographic fingerprint being received, or libotr wanting to send a message to the other end. The later happens frequently during OTR session establishment.

If a program monitors it's socket IO using select() or some other mainloop abstraction, then having these internal protocol messages being sent is not so much of an issue. Alas, for the simple echo server I present one must remember that there might be one or more internal OTR protocol messages sent from what seems like outside of the normal program flow. I'll get back to this point while describing the relevant section of the first example.

Many of the callback functions in s_OtrlMessageAppOps might be simple stubs, but you should be aware of inject_message() which will be called when libotr itself wants to send something, notify and display_otr_message can both provide feedback to the user, the new_fingerprint() method is called when a remote key is discovered in order to allow you to inform the user and possibly abort the session. The gone_secure() method is called to allow you to inform the user that they are off the record. When you call libotr functions you supply both a pointer to a s_OtrlMessageAppOps structure uiops and a void* opdata. When libotr calls a method in uiops it will pass opdata back to you.

Another common three parameters you will pass to libotr functions are the accountname, protocol and sender or receiver name. The protocol string can be anything as long as both ends of the system use the same protocol string. The state data that libotr uses is stored in an OtrlUserState object which is created with otrl_userstate_create() and passed to many of the libotr functions along the way.

The code below loads a private key or creates a new one if none already exists. Because creating a new key is an entropy heavy operation, the setupKey() function warns the user that if they are erratic it the process might move along a bit quicker. Note that the uiops has a callback create_privkey to generate a key if needed. I just prefer to make this codepath explicit and out of the main callback logic.

 bool ok( gcry_error_t et )
{
    return gcry_err_code(et) == GPG_ERR_NO_ERROR;
}

void setupKey( const std::string& filename )
{
    gcry_error_t et;
    
    et = otrl_privkey_read( userstate, filename.c_str() );
    if( !ok(et) )
    {
        cerr << "can't find existing key, generating a new one!" << endl;
        cerr << "this needs a bunch of entropy from your machine... so please" << endl;
        cerr << "move the mouse around and slap some keys mindlessly for a while" << endl;
        cerr << "a message will be printed when keys have been made..." << endl;
        et = otrl_privkey_generate( userstate, filename.c_str(),
                                    accountname, protocol );
        if( !ok(et) )
        {
            cerr << "failed to write new key file at:" << filename << endl;
        }
        cerr << "Have keys!" << endl;
    }
}

The main.cpp program implements both the client and server. The server mode is selected by passing -s at startup. Firstly, a userstate is created, some variables set depending on if we are a client or server, and the correct private key is loaded or created.

    OTRL_INIT;
    userstate = otrl_userstate_create();

    keyfile = "client.key";
    accountname = "client";
    recipientname = "server";
    if( ServerMode )
    {
        keyfile = "server.key";
        accountname = "server";
        recipientname = "client";
    }
    setupKey( keyfile );

The core logic for the echo client is to read a string from the user, send it to the server, grab a reply from the server and show it to the user. The start of the client code connects to a given port on localhost and reads a string from the user.

        VMSG << "client mode..." << endl;
        stringstream portss;
        portss << Port;
        iosockstream stream( "127.0.0.1", portss.str() );
        if (!stream)
        {
            cerr << "can't connect to server!" << endl;
            exit(1);
        }

        string s;
        while( true )
        {
            getline(cin,s);
            cerr << "your raw message:" << s << endl;
            cerr << "send plaintext:" << colorsend(s) << endl;


We certainly do not want to send the raw string s over the wire to the server though. That would very much be "on the record". So the next fragment of the client gets libotr to encrypt the string s so we can send it off the record to the server. The userstate is the value created during program initialization using otrl_userstate_create(). The ui_ops is the vtable s_OtrlMessageAppOps structure described above, and opdata is the value we want libotr to pass back to our methods in ui_ops when it uses them. In this case, we use the address of the iostream for the socket as the opdata so callbacks can send and receive data on the socket if they so desire. The newmessage will point to an off-the-record message that the server can decrypt to read the string s. The tests on the return value for message_sending() ensure that we have a new, encrypted off the record message to send instead of the plaintext s.

 void* opdata = &stream;
OtrlTLV* tlvs = 0;
gcry_error_t et;
char* newmessage;

void* opdata = &stream;
OtrlTLV* tlvs = 0;
gcry_error_t et;
char* newmessage;

et = otrl_message_sending( userstate, &ui_ops, opdata,
                           accountname, protocol, recipientname,
                           s.c_str(), tlvs, &newmessage,
                           myotr_add_appdata, &ui_ops );
cerr << "encoded... ok:" << ok(et) << endl;
if( !ok(et) )
{
    cerr << "OTR message_sending() failed!" << endl;
}
if( ok(et) && !newmessage )
{
    cerr << "There was no error, but an OTR message could not be made." << endl;
    cerr << "perhaps you need to run some key authentication first..." << endl;
}
if( newmessage )
{
    VMSG << "have new OTR message:" << newmessage << endl;
    s = newmessage;
}
 
Since we have replaced the plaintext s with the off the record version, we send that to the server using the socket iostream and then wait a moment before reading a response. The while loop is slightly hairy in that it will block for new messages if we are not secure. As I mentioned above, libotr can call the inject_message() callback to write a new off the record message to the socket. Outgoing messages will be generated and injected during session establishment. There is no incoming version of inject_message() so the client needs to keep reading these injected messages before it tries to send another off the record message. One will find that there are many messages exchanged between libotr at each end when the string s is written to the socket. This only happens the first time through to setup the OTR protocol.

When reading messages from the server, the encrypted string is read and passed to otrl_message_receiving(). If the recevied message was an OTR message that was sent from the other end by libotr using inject_message() then otrl_message_receiving() will indicate to the client that it should simply ignore this message. Otherwise a real message was encrypted and sent by the server and so the client will show the user the decrypted newmessage.


 cerr << "WRITE:" << s << endl;
stream << s << endl;
usleep( 200 * 1000 );
while( !secure && stream.peek() != std::iostream::traits_type::eof()
       || secure && stream.rdbuf()->available() )
{
    s = "junk";
    VMSG << "reading data from server" << endl;
    getline(stream,s);
    VMSG << "READ:" << s << endl;

    int ignore_message = otrl_message_receiving(
        userstate, &ui_ops, opdata,
        accountname, protocol, recipientname,
        s.c_str(),
        &newmessage,
        &tlvs,
        myotr_add_appdata, &ui_ops );

    VMSG << "ignore:" << ignore_message << " newmsg:" << maybenull(newmessage) << endl;
    if( ignore_message )
    {
        VMSG << "libotr told us to ignore this message..." << endl;
        VMSG << "available:" << stream.rdbuf()->available() << endl;
        VMSG << " in_avail:" << stream.rdbuf()->in_avail() << endl;
        
        continue;
    }
    if( newmessage )
        s = newmessage;
    otrl_message_free( newmessage );

    cout << color( s ) << endl;
}
 
Server mode is handled by a thread which executes server_session() using the std::iostream for the new socket.

if( ServerMode )
{
    VMSG << "server mode..." << endl;

    boost::asio::io_service io_service;
    tcp::acceptor a( io_service, tcp::endpoint( tcp::v4(), Port ));
    for (;;)
    {
        h_iosockstream stream(new iosockstream());
        a.accept( *(stream->rdbuf()) );
        boost::thread t(boost::bind(server_session, stream));
    }
}

The server implementation would look like the below if OTR messaging was not being used.

void server_session( h_iosockstream streamptr )
{
    iosockstream& stream = *(streamptr.get());
    while( stream )
    {
       std::string s;
       getline( stream,s );
       cout << "server got:" << s << endl;
       stream << s << endl;
    }
}
 
The OTR server implementation starts out the same way, reading a string from the socket. Then our old friend otrl_message_receiving() is called to decrypt that message. If ignore_message is set then there is nothing to be done and we simply continue to the top of the loop to read another string from the client. Also, if we are not yet secure, there is no point in trying to send a new OTR message back to the client, so we simply continue at the top of the while loop again. This way we avoid writing replies to the client when session establishment messages are sent by libotr on the client side.

This might seem a little strange at first, how will we ever become secure and start replying to the client if all we do is read from them and throw away the messages. The thing to keep in mind is that messages sent with inject_message() on the client will be seen by libotr when we call otrl_message_receiving() which in turn might cause libotr on the server to inject_message() with a reply to this session establishment message. Eventually libotr will call the gone_secure() OtrlMessageAppOps callback in which we set the global variable secure to true, this allowing the server to start replying to the client as it normally would.

void server_session( h_iosockstream streamptr )
{
    iosockstream& stream = *(streamptr.get());
    while( stream )
    {
        gcry_error_t et;
 std::string s;
 VMSG << "getting more data from the client..." << endl;
 getline( stream,s );
 VMSG << "READ:" << s << endl;
                    
 void* opdata = &stream;
 OtrlTLV* tlvs = 0;
 char *newmessage = NULL;
 int ignore_message = otrl_message_receiving(
    userstate, &ui_ops, opdata,
    accountname, protocol, recipientname,
    s.c_str(),
    &newmessage,
    &tlvs,
    myotr_add_appdata, &ui_ops );

 VMSG << "ignore:" << ignore_message << " newmsg:" << maybenull(newmessage) << endl;
 if( newmessage )
        s = newmessage;
 otrl_message_free( newmessage );
 if( ignore_message )
 {
     VMSG << "libotr told us to ignore this message..." << endl;
     continue;
 }
                
 cout << "ignore:" << ignore_message << " server got:" << s << endl;
 cout << "message from client:" << color(s) << endl;

 // do not echo back messages when we are establishing the session
 if( !secure )
     continue;
 
The remainder of server_session() creates the echo reply message, encrypts it with otrl_message_sending() and sends the OTR message over the socket.

  static int count = 0;
  stringstream zz;
  zz << "back to you s:" << s << " count:" << count++;
  s = zz.str();
  cout << "writing...s:" << s << endl;
  cerr << "send plaintext:" << colorsend(s) << endl;

  et = otrl_message_sending( userstate, &ui_ops, opdata,
     accountname, protocol, recipientname,
     s.c_str(), tlvs, &newmessage,
     myotr_add_appdata, &ui_ops );
  if( !ok(et) )
  {
     cerr << "OTR message_sending() failed!" << endl;
  }
  if( ok(et) && !newmessage )
  {
     cerr << "There was no error, but an OTR message could not be made." << endl;
     cerr << "perhaps you need to run some key authentication first..." << endl;
  }
  if( newmessage )
  {
     VMSG << "have new OTR message:" << newmessage << endl;
     s = newmessage;
  }
                
  VMSG << "writing otr...s:" << s << endl;
  stream << s << endl;
 
As the security of the OTR messaging relies on fingerprints in the first example, the new_fingerprint callback presents our fingerprint and the remote fingerprint and asks the user if they want to continue to establish the session or not. Unforuntately this means the user has to eyeball scan the remote fingerprint against an expected value they have obtained from the remote party at some other time in a secure channel.

static void myotr_new_fingerprint( void *opdata, OtrlUserState us,
                                   const char *accountname, const char *protocol,
                                   const char *username, unsigned char fingerprint[20])
{
    cerr << "myotr_new_fingerprint(top)" << endl;

    char our_fingerprint[45];
    if( otrl_privkey_fingerprint( us, our_fingerprint, accountname, protocol) )
    {
        cerr << "myotr_new_fingerprint() our   human fingerprint:" << embold( our_fingerprint ) << endl;
    }
    
    cerr << "myotr_new_fingerprint() their human fingerprint:"
         << embold( fingerprint_hash_to_human( fingerprint )) << endl;
    cerr << "do the fingerprints match at the remote end (enter YES to proceed)" << endl;
    std::string reply;
    getline( cin, reply );
    if( reply != "YES" )
    {
        cerr << "You have chosen not to continue to talk to these people... good bye." << endl;
        exit(0);
    }
}

Simpler authentication with SMP

The second example uses the SMP to avoid having to verify fingerprints. For good measure, the fingerprints established are saved and loaded to/from disk so that subsequent conversations do not need any SMP or user fingerprint verification.

During process startup, fingerprints are read from file if they exist;

 std::stringstream fn;
 fn << "fingerprints-" << accountname;
 gcry_error_t e = otrl_privkey_read_fingerprints( userstate, fn.str().c_str(), 0, 0 );


The otrl_message_sending() and otrl_message_receiving() functions both have a parameter OtrlTLV *tlvs. The tlvs allow data to be sent and received as sideband information that does not effect what you send with libotr. The SMP uses the tlvs to communicate the information that it needs in order to authenticate.
In server_session() the main change is a check on the tlvs variable after calling otrl_message_receiving().

 if( tlvs )
 {
    handle_smp( stream, tlvs, userstate, &extended_ui_ops, opdata );
 }
 
The client initiates the SMP and has heavier changes to it's code. After creating a iosockstream to localhost, the client calls run_smp_client() to setup the OTR session and run the SMP to authenticate. Apart from the call to run_smp_client() the client mainloop while(true) doesn't need to change. This makes sense because the SMP is normally only used at session establishment when we do not know about the remote key (fingerprint) already.

In the run_smp_client function, the first while( !secure... loop will establish an OTR session using fingerprints just like the first example. This time we do not stop to ask the user to verify the fingerprints, we simply record that a new fingerprint was seen. This is done by setting runSMP=true to force the SMP if we are using a fingerprint that we didn't already have on disk.

If runSMP is set then we read a secret from the user and call otrl_message_initiate_smp() to get the SMP ball rolling with libotr. This leads to the second while( !secure loop which will stop when we are secure again.

void run_smp_client( iosockstream& stream )
{
    void* opdata = &stream;
    OtrlTLV* tlvs = 0;

    // establish session using fingerprints
    stream << "?OTR?v2?" << endl;
    usleep( 200 * 1000 );
    while( !secure && stream.peek() != std::iostream::traits_type::eof() )
        client_read_msg_from_server( stream );

    if( !runSMP )
    {
        return;
    }
    
    VMSG << "Starting the Socialist Millionaires' Protocol " << endl
         << " to work out who the other guy is..." << endl
         << endl;
    VMSG << "please give me a secret that only you and the other guy know..." << endl;
    std::string s;
    getline( cin, s );
    int add_if_missing = true;
    int addedp = 0;
    ConnContext* smpcontext = otrl_context_find( userstate,
                                                 recipientname, accountname, protocol,
                                                 add_if_missing, &addedp,
                                                 myotr_add_appdata, &ui_ops );

    cerr << "addedp:" << addedp << " smpcontext:" << smpcontext << endl;
    if( !smpcontext )
        return;
    otrl_message_initiate_smp( userstate, &ui_ops, opdata, smpcontext,
                               (const unsigned char*)s.c_str(), s.length() );

    // we are only secure if the SMP succeeds
    secure = 0;
    while( !secure && stream.peek() != std::iostream::traits_type::eof() )
        client_read_msg_from_server( stream );
        
    cerr << "secure:" << secure << endl;
    if( secure == SMP_BAD )
    {
        cerr << "couldn't authenticate server, exiting..." << endl;
        exit(1);
    }
}
 
The client_read_msg_from_server() function calls otrl_message_receiving() and checks if tlvs is set and if so calls handle_smp() with that tlvs value.

As you see from the above, whenever a tlvs is set in the client or server then handle_smp() is called. If you look at the UPGRADING file in libotr 3.2.0+ you will see a skeleton code in "3.3.4. Control Flow and Errors" which the handle_smp() is based on. The handle_smp() function uses otrl_tlv_find() on tlvs to check for internal OTR messages sent from libotr itself which describe a stage in the SMP. handle_smp() is like a primitive state machine working through from SMP1 (the server asking for the secret to respond to the client's initial request), through to SMP3 and SMP4 which are called when the protocol completes with either success or failure (same or different secrets).

  if( tlv = otrl_tlv_find(tlvs, OTRL_TLV_SMP2))
  {
    if (nextMsg != OTRL_SMP_EXPECT2)
    {
       cerr << "smp: spurious SMP2 received, aborting" << endl;
       otrl_message_abort_smp( userstate, ui_ops, opdata, smpcontext);
       otrl_sm_state_free(smpcontext->smstate);
    }
    else
    {
       cerr << embold("SMP2 received, otrl_message_receiving will have sent SMP3") << endl;
       smpcontext->smstate->nextExpected = OTRL_SMP_EXPECT4;
    }
  }
 
If the secrets are proven to be the same when the SMP is used it is adventagious to save the fingerprints to disk so that future communications do not require user fingerprint verificaiton or the SMP.

if(  tlv = otrl_tlv_find(tlvs, OTRL_TLV_SMP4) 
  || tlv = otrl_tlv_find(tlvs, OTRL_TLV_SMP3))
 {
 if( smpcontext->smstate->sm_prog_state == OTRL_SMP_PROG_SUCCEEDED )
   {
     std::stringstream fn;
     fn << "fingerprints-" << accountname;
     gcry_error_t e = otrl_privkey_write_fingerprints( userstate, fn.str().c_str() );
   }
}


Hopefully you are now in a better position to add libotr support to
   your real time network programs. The full source code to these
   programs as well as the HTML for this post itself is up on my
   github page. Remeber, using off the record messaging doesn't
   nessesarily mean you have anything to hide, just that you have
   nothing to show.

Monday, July 23, 2012

RDF: Abiword and Calligra

Over the last few years I've been fortunate enough to hack on Calligra and Abiword, adding support for the RDF/XML that can be stored as part of an ODF document. Both suites can also interact with each other, allowing RDF to move over the clipboard along with the text content.

There are some things abiword can do with RDF that Calligra currently can't. These include highlighting the parts of the document that have RDF associated and initial support for capturing relations between things in RDF. Such relationships from RDF can give back to the user right off the bat. For example they can be useful for navigating the document by semantics, moving from a child to their parent, or the cat to it's owner. RDF also opens up document computing to other possibilities like navigating by time rather than by the linear sequence of pages.

I am currently looking to do some more development around ODF. It would be wonderful to do some more indepth hacking on either project as they both have a very nice, welcoming, open source team behind them. If anybody knows of some sponsored hacking floating around for these tools, please get in touch :)

I recently committed a small change to Calligra to move back to using intrusive reference counting for some non graphical RDF objects. While Calligra can use marble to allow editing locations from RDF, I used marble at a level in the calligra stack that isn't optimal, so have to shift that to a plugin to allow it to be easily accessible to distribution builds.